DEMON Cycles

Neo Time Trial frame

The frame is an aero full carbon monocoque from Karbona. Finish is 12K carbon fibre weave with a high gloss lacquer overlay. Design is horizontal top tube with a nice steep seat tube angle of 75.5 degrees. Have a look at the table below to get the geometries. Available in 3 sizes. With the additional strengthening and stiffness compared to the road frames this naturally weighs in just a tad heavier. It comes as a complete frameset - frame, aero forks, aero seatpin and seat clamp. Weight for the Small frame is 1300gr.

For information the main sizes are as follows:-

Size ref	Seat Tube (mm)	Top Tube (mm)	Seat tube angle (degrees)	Steering angle (degrees)	Head tube length (mm)
L	545	556	75.5	73	90
M	525	526	75.5	72.5	90
S	515	496	75.5	72	90

Note1: Seat tube is measured from the centre of the bottom bracket to the very top of the seat-clamp post (ie several cm above the upper edge of the top tube).
Note2: Top tube size is measured from the centre of the head tube to the centre of the seat tube on a line along the centre of the top tube

Further features of this frame are as follows:-

Priced as a complete set - frame, aero forks, aero seatpin & seat clamp.
68mm bottom bracket shell, with British thread 1.370x24
Internal brake cable routing
Internal gear cable routing
Replaceable gear hanger
Accepts 42mm integrated headset
Braze-on fitment for front mech
Single rear stay that splits at the brake bridge
Horizontal rear drop-outs with locking adjusters to get that rear wheel as close as you wish to the curved down tube (or to facilitate fixed wheel)
Sculpted aero frame

To see the technical drawing for the S frame Click here

To see the technical drawing for the M frame Click here

To see the technical drawing for the L frame Click here